The simple, step-by-step guide to getting accurate measurements for your custom countertop.
Whether you're replacing an old countertop or designing a brand-new one, taking accurate measurements is one of the most important steps in the process. The good news? It doesn’t have to be stressful or complicated. In this guide, we’ll walk you through how to measure your countertop space confidently—even if you're not a pro.
🧰 What You'll Need
Before you get started, gather a few basic tools:
-
Measuring tape (preferably in inches)
-
Pencil and paper (or use our printable measurement sheet)
-
Calculator (optional but helpful)
-
A basic sketch or floor plan of your countertop area
📐 Step-by-Step: How to Measure Your Countertop
Step 1: Sketch the Layout
Draw a top-down view of your kitchen or bathroom countertop area. Don’t worry about being artistic—just include the shapes and sections where countertops will be installed. Label each section (e.g., A, B, C) so it’s easy to keep track of.
Include:
-
Sink areas
-
Stove cutouts (if needed)
-
Any wall edges or open ends
-
Islands or peninsulas (if applicable)
Step 2: Measure the Length and Depth of Each Section
For each section of countertop:
-
Length: Measure from one end to the other, edge to edge, along the wall or cabinet line.
-
Depth: Most standard countertops are 25.5 inches deep (from the wall to the front edge), but always measure to confirm—especially for vanities or custom builds.
Tip: Measure twice to be sure, and always round up to the nearest 1/8 inch.
Step 3: Include Backsplash (If Applicable)
If you want a 4" or full-height backsplash, measure the length of the walls where it will go, and note the desired backsplash height.
Step 4: Note Sink & Faucet Cutouts
Mark where the sink will go in your sketch and whether you’ll need:
-
A sink cutout
-
A single or triple faucet hole
-
A soap dispenser hole
You don’t need exact positions yet—just note which accessories you'll need holes for.
Step 5: Add Island or Bar Tops (If Needed)
If you have a kitchen island or extended bar top, measure those separately and clearly label them on your sketch. Don’t forget to include overhangs if you want a seating area.
Step 6: Double-Check for Appliances and Clearances
Make sure your measurements take into account:
-
Fridges or stoves that sit beside countertops
-
Overhang clearance
-
Cabinets that end at corners or walls
🛠️ What Happens After You Measure?
✅ If You’re Ordering Pickup or Delivery Only
The countertop will be fabricated exactly to your measurements. Double-check everything carefully—our team cannot be responsible for inaccurate sizes if you're not using our installation service.
✅ If You’re Getting Installation
Just provide rough measurements when ordering. A professional will come to your home to take final, accurate measurements before fabrication. If anything changes during this visit (size, layout, upgrades), your price will be adjusted accordingly and we’ll confirm everything before moving forward.
📏 Need Help? We’ve Got You.
We know measurements can feel overwhelming, especially if you’ve never done it before. Our team is here to help answer questions or walk you through it—just reach out any time.
And remember, if you choose our installation service, we’ll handle the final measuring for you.
🎯 Quick Measurement Tips
-
Always measure to the nearest 1/8 inch
-
Label every section clearly
-
Don’t forget islands, backsplashes, or cutouts
-
Use straight lines and simple notes
-
When in doubt, round up slightly
Ready to Start?
Once you have your measurements, head to our Online Ordering Page or Contact Us to get your custom quote. Still have questions? We’re happy to help!